Pro.Mecc Freccia Скачать руководство пользователя

Страница: 3 / 27

Maintenance Manual V001
FRECCIA

Maintenance Manual V001

FRECCIA

Seite 4

Seite 5

1. GENERAL

This Maintenance Manual is updated regularly. The latest versions can be downloaded as a PDF

file on the Web site of the manufacturer (www.promecc.com). The current version number is prin-

ted on each page in the header (V ---).
Respect the copyright! This flight manual may not be copied or distributed without the written

consent of the originator, not even in a modified form.

MANUFACTURER of the aircraft:

PRO.MECC s.r.l.

Zona Artigianale S.S. 16 - Km 976

73022 - Corigliano D’Otranto (LE)

ITALY
www.promecc.com

As for the engine group’s ordinary and extraordinary maintenance, the user must follow the

instructions in Rotax manual.

As for the propeller’s ordinary and extraordinary maintenance, the user must follow manu-

facturers operating manual’s instructions.

NOTE 1: At the moment for maintenance related to tightening or substitution of detacha-

ble match elements you should mark the revised elements with an indelible colour. The

colour must be different according to the kink of maintenance (frequency, replacement,

tightening, etc.). The legend with the colours which have been used and the kind of main-

tenance which have been carried out will be included enclosed in the aircraft’s maintenance

booklet.

NOTE 2: in any case refer to the manufacturer, to specialized firms or to authorized resel-

lers and render a precise account of maintenances.

All major repairs and spare part replacements MUST be done by authorised service person-

nel.

However, you are encouraged to take care of preventative maintenance yourself.
This includes:

tire and wheel bearings replacements, safety wire replacements, door and safety harness replace-

ment, light bulb replacements, fuel hose replacements, battery servicing and replacement, sparks

and spark plugs replacements and air filter replacements.

Содержание Freccia




























Результаты поиска

Содержание Freccia

Отзывы:

Похожие инструкции для Freccia

Бренды по названию

Популярные бренды

Pro.Mecc Freccia, Руководство по обслуживанию

Результаты поиска

Содержание Freccia

Отзывы:

Похожие инструкции для Freccia

Бренды по названию

Популярные бренды