12
Sign Side Setup
Make the following connections to the Wireless COM Transceiver:
(a) Connect the antenna.
(b) Connect the power jack end of the power cable to the power port on the transceiver.
(c) Now connect the red wire to
V+
and the black wire to
V-
on the sign’s DC power supply.
(d) On Type
A
transceiver models, connect the transceiver’s 9 pin connector to the sign’s 9 pin
connector.
On Type
B
transceiver models, connect the sign’s 9 pin connector directly to the 9 pin port of
the transceiver.
On the back of the sign there is a serial
cable with a 9 Pin Connector.
Содержание Marquee-Lite Plus 4025
Страница 1: ...1 Model 4025...
