Pro-Line Boats VS-C2, Руководство пользователя

Страница: 16 / 20

16 INSTALLATION AND OPERATING INSTRUCTIONS
Problem Possible Cause Solution
Vacuum sealer bag loses
vacuum after being sealed.
1. Bag not sealed properly.
2. Moisture or juices
from foods.
3. Bag has a hole.
1. Wrinkles, crumbs, grease or liquids may cause leaks along the
seal. Reopen bag, wipe the top inside of the bag and smooth it out
along the sealing strip before resealing.
2. Check if there is moisture or juices from the food present within the
bag, if yes, you may need to cut open the bag and reseal it, or use an
entirely new bag. Foods with excess liquids should be frozen before
vacuum sealing.
3. If items with sharp edges, they may have punctured the bag, and
released the vacuum. Cushion sharp edges in the contents of the bag
with paper towels.
Vacuum sealer not sealing
bag properly
1. Sealing strip is too hot.
2. Seal Only function still active
or needs to reset.
1. If sealing strip over heat and melted the bag, it’s necessary to lift
the lid and allow sealing strip to cool for a few minutes.
2. Before re-pressing the “seal only” key, allow the unit to resume for
15 seconds.
Some spare parts are available for purchase from www.prolineaustralia.com.au/shop