The anodized aluminum frame comes with a fiberglass hard top and built in storage box. A set of 4 rod
holders is permanently mounted to the aft legs of the frame; providing you with additional rod holder
capacity. See the Service and Care section of this manual for cleaning recommendations for the
anodized aluminum frame and fiberglass hard top.
Note: The hard top frame was designed to provide cover for you while you are out on the
water and to house the factory installed components. This frame is not intended for
standing on while you are fishing or underway. Modifications to the frame or the
improper installation of after market components of a sizeable weight will void the
warranty.
Hard Top with Storage Box & Outriggers (Optional)
When factory installed, this options includes the same frame and storage box as above. However, with
the installation of the outriggers, we have included mounting pads for additional support.
When this option is selected and factory installed, the outrigger installation includes a pair of outrigger
bases, poles and lines. The bases are constructed of anodized aluminum and are installed on the port
and starboard sides of the optional T-top. Turn the handle at the bottom of the outrigger base to rotate
the outriggers 90 degrees (from the side to the aft end of the boat).
Seating
The following seating comes standard on the 32 Express:
Command seat
Rear facing aft cockpit seat
Lounge seat with bolster
Fold away transom seat
Tub below the
seat drains into
the bilge and
does not drain
overboard.
51
