Pro-Line Boats 2010 26 Express Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 55

background image

34

Please see the Service and Care section of this manual for information on how to clean and care for your cabin
cushions, pillows vinyl upholstery.

Stove

The single burner butane stove is installed in the galley area of the cabin.
See the Service and Care section of this manual for cleaning
recommendations.

Please refer to the owner’s manual provided by the manufacturer of the
butane stove for operational procedures and for information related to the
care and maintenance of their product. When in doubt, always defer to the
stove manufacturer’s instructions and/or recommendations.

Be sure to familiarize yourself with all of the safety instructions provided by
the stove manufacturer.

How to install the butane canister: Open the canister cover. Make sure the ignition knob is in the off position and
the canister lever is in the release position. If the ignition knob is not completely in the off position, the canister
cannot be engaged into the lock position. Install the canister so that the canister hole is aligned with the canister
guide. Lock by pushing the canister lever down and then close the canister cover. Before turning the unit on,
check that the canister is positioned properly and that the canister lever is in the on position.

How to ignite: Turn the ignition knob 90 degrees counter clockwise completely until you hear a click sound. If the
burner does not light, repeat the ignition procedure.

How to control the flame: Turning the ignition knob slowly toward the off position from the on position can
regulate the size of the flame.

«
...
38
39
40
41
42
...
»

Содержание 2010 26 Express
























































Отзывы:

Нет отзывов

Похожие инструкции для 2010 26 Express

2550 Console Cabin

Бренд: PURSUIT Страницы: 29

Бренд: BIC Sport Страницы: 12

Бренд: JETSURF Страницы: 47

360 Degrees Angler

Бренд: Blue Sky Boatworks Страницы: 21

Бренд: Old Town Canoe Co. Страницы: 14

Бренд: Grady-White Boats Страницы: 66

Бренд: Grady-White Boats Страницы: 76

Бренд: Grady-White Boats Страницы: 78

Бренд: Grady-White Boats Страницы: 74

Бренд: Grady-White Boats Страницы: 76

Бренд: Grady-White Boats Страницы: 87

Бренд: Canadian Electric Boat Company Страницы: 32

Бренд: Access Dinghy Страницы: 27

Бренд: Gnom Rov Страницы: 27

Бренд: Sailfish Страницы: 43

2200-V Tournament Edition

Бренд: PATHFINDER Страницы: 10

Бренд: Gumotex Страницы: 40

Бренд: Ockelbo Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды