13
Trim Tab Indicators (Optional)
The trim tab indicator switch may be added when trim tabs are factory installed. The
waterproof indicator and switch lights up to let you know exactly where your trim tabs
are.
Windlass with Rode and Chain (Optional)
The windlass anchor system is located on the bow. It is an electric hands free anchor system that allows the
driver to raise or lower the anchor while staying at the helm. The windlass comes with 200 feet of ½ inch line and
6 feet of ¼ inch rode.
The windlass switch is located at the helm and is protected by a 50-amp breaker. The. The breaker is located on
the console in close proximity to the switch.
To operate the windlass, press the windlass toggle switch to the down position to release the anchor and line.
After dropping the anchor, be sure to tie the line off at one of the cleats. If you do not tie off at a cleat, the
constant pull against the line could cause the windlass motor to fail. To retrieve the anchor, press the windlass
switch to the up position and carefully raise the anchor up. Do not allow the anchor to hit the boat.
Windlass Windlass
Switch
Refer to the owner’s manual that was provided by the manufacturer of the windlass for operational procedures
and information related to the care and maintenance of their product. When in doubt, always defer to the
windlass manufacturer’s instructions and/or recommendations.
Содержание 2010 26 Express
Страница 2: ...ii ...