Storage
Your boat has storage areas for your tackle and/or gear:
•
Storage shelf installed in the head area.
•
Storage compartment below the forward console seat.
•
Two forward fish boxes that can double as wet/dry casting deck storage boxes.
•
Storage in the floor forward of the console seat. If you have selected the optional cockpit
shower, the water tank will be installed in this compartment.
Rod Holder Storage - Plenty of rod holder storage is available on your boat:
•
Rod Holders w/Inserts - One pair of stainless steel rod holders with PVC inserts to protect
your rods. An additional pair of rod holders may be installed on the gunwales as an
option.
•
Rod Racks - A pair of rod racks is installed in the port and starboard freeboard of the aft
cockpit. Combined, they can accommodate up to 8 fishing rods.
•
Outriggers (Optional) - This option requires the installation of the optional rigid T-top
frame. The outrigger installation includes a pair of outrigger bases, poles and lines. The
bases are constructed of anodized aluminum and are installed on each side of the
optional T-top frame. Turn the handle at the bottom of the outrigger base to rotate the
outriggers 90
o
(from the side to the aft end of the boat).
•
Four additional vertical rod holders are mounted on the optional T-top frame.
Bimini Top (Optional)
The Bimini top frame is made of anodized aluminum and the Bimini canvas top is made of high quality
Sunbrella canvas. Please see the Service and Care section of this manual for cleaning and care
recommendations.
Rigid T-Top with Storage Box (Optional)
The anodized aluminum frame comes with a rigid T-top
and a built in storage box. A set of 4 rod holders is
permanently mounted to the aft edge of the top of the
frame; providing you with additional rod holder capacity.
See the Service and Care section of this manual for
cleaning recommendations for the anodized aluminum
frame and the top.
Life Jacket
Pouch
Set of 4 Rod
Holders
Overhead
Storage Box
Note: Pro-Line installs mounting pads to the frame for additional support when outriggers
are factory installed. Before adding after market outriggers, we recommend that you
consult your Pro-Line dealer’s Service Department or another qualified service
professional to add mounting pads to the T-Top frame.
Rigid T-Top with Storage Box and Outriggers (Optional)
When factory installed, this option includes the same frame and storage box as above. However, with the
installation of the outriggers, we have included mounting pads for additional support.
34
