1 Bilge Pump - Your 24 Super Sport is equipped with an automatic bilge pump and float switch.
This 1100 gph pump is located in the bilge and is mounted as far aft as possible. The bilge
pump and float switch are accessible via the hinged hatch over the aft bilge.
The bilge pump is wired automatic to the battery and has a manual override located at the
switch panel on the console. The automatic float switch is wired directly to the
Starboard
battery terminals through breakers or inline fuses. The circuit breaker is located at the helm
next to the manual switch. Depressing the bilge pump switch to the up or forward position
activates the bilge pump.
2 Navigation & Anchor Lights - Locate the Nav. light switch on the instrument panel. This is a 3-
way switch (forward, middle, back/aft) that functions as follows when you press the switch:
•
Forward position - Turns on the bow lights and the anchor light. This position
will also activate the red light in your compass.
o
If you have Faria gauges on the dash panel, this function will
illuminate the gauge lights.
o
If the gauges were provided by the engine manufacturer (i.e.,
Mercury, Honda, etc.), this switch will not illuminate the gauge
lights. Instead, your gauge lights will be illuminated when the
ignition switch is turned on.
•
Middle position – All lights are off.
•
Back/Aft position – Anchor light is on; the bow lights and gauge lights are off.
3 Cockpit Lights (Optional) – Your vessel may be equipped with cockpit/ courtesy lights. The
lights have LED (light emitting diode) bulbs with a lifespan of approximately 10,000 hours. To
activate the lights, depress the switch to the up or forward position. The lights give off a soft
warm light which should not affect your night vision, but will still provide you with enough light to
safely move around your cockpit in low visibility conditions.
4 Cabin Lights – The cabin light switch provides power to the round light located in the head area.
To activate this light, depress the switch to the up or forward position. Then press the on/off
switch located on the base of the light.
5 Baitwell Light - To activate the baitwell light, depress the switch to the up or forward position.
This will activate the LED (light emitting diode) light inside your baitwell tub. It is a soft white
light that will keep your bait moving and lively. It will also help you locate your bait on those
early morning or late night fishing trips. To turn the light off, simply depress the switch to the
down or aft position.
6, 7 Accessory - This 5 amp accessory switch can be used for additional dealer installed
accessories. Please check the amp rating of any new component and/or additional accessory
before installation.
8 Horn - The horn is used to signal, warn, or alert other boats, swimmers or people on shore.
Depress the horn switch to the up or forward position to activate the horn. Release the horn
switch to deactivate the horn. Using different sequences of horn blasts indicates different and
sometimes dangerous situations to you or someone around you.
Avoid any horn use without an appropriate purpose. See the Safety Section in this manual
and/or take a safe boating course for more information on the proper use of the horn.
9 Accessory – These two 5 amp accessory switches can be used for additional dealer installed
accessories. Please check the amp rating of any new component and/or additional accessory
before installation.
17
