19
9
Washdown Pump –
To activate the washdown pump, which is located on top of the starboard aft
stringer, depress the switch to the up or forward position. The washdown pump draws its water
from the same seacock that the baitwell pump draws its water. To turn the pump off, depress
the switch in the down position. Keep the washdown switch in the off position if the pump is not
going to be used soon.
10 Fish Box Pump - The switch and breaker panel on the 25 Sport is used on other models and the
fish box pump switch is not applicable on this model. The casting desk storage box and the 40-
gallon capacity fish box are plumbed together and gravity drain overboard via a thru hull fitting on
the starboard side of the hull.
11 Fresh
Water – The fresh water switch provides power to the fresh water pump. Depress the
fresh water switch to the forward position to activate the fresh water pump. The fresh water
faucet/nozzle is located behind a white cap inside the transom sink. Press the button on the
handle to activate the faucet/nozzle. If the fresh water system is not going to be in use, stow
away the faucet and hose and move the switch to the aft or down position to turn the pump off.
12, 13 Accessory - This 5 amp accessory switch can be used for additional dealer installed accessories.
Please check the amp rating of any new component and/or additional accessory before
installation.
Lighting Systems
Cabin / Head Light
The cabin light switch provides power to the round light that is located in the head. To operate the light in
the head, depress the cabin light switch on the console to the forward or on position. The light can then
be turned on or off from inside the head by depressing the small button on the base of the light assembly.
Cockpit Lights (Optional)
The cockpit lights are small circular lights located at the base of the console
near the helm seat. Locate the 2-way cockpit light switch on the switch panel
and press the switch in the forward position to turn on the cockpit lights. Press
the cockpit light switch in the back or aft position to turn the lights off.
Navigation and Anchor/All Around Lights
The navigation and anchor/all around lights are required to be used for operation at night or under low
visibility conditions to indicate your position to other boaters. Visually verify the operation of your
navigation and anchor/all around lights and verify that the lights are free from obstructions. You should
check your navigation lights monthly during optimum visibility conditions.
•
When you are underway in low visibility conditions, you should have the Nav. Lts. switch
in the up or forward position. This will activate the navigation lights, as well as your
anchor/all around light.
•
When you are anchored or in low visibility conditions, you should turn on the anchor/all
around light. Press the Nav. Lts. switch to the down or aft position to turn on the
anchor/all around light.
