PRO Light V200LED, Руководство пользователя

Страница: 36 / 44

V200LED
14
3.12 WORKING PARAMETERS EDITING
It is possible to edit the unit parameters in the following way:
• Press the MENU button to access the functions. Use the UP and DOWN buttons to select the desired
parameter, then press the ENTER button.
• Use again the UP and DOWN button to set a value for the parameter, then press ENTER to confirm.
In the following all the menu editable parameters:
bLNd
Black Out Mode
YES
Enable the function
no
Disable the function
IPAn
Pan opposite rotation
YES
Enable the function
no
Disable the function
It IL
Tilt opposite rotation
no
Disable the function
I
Enable the function
LEd
Led On/Off
on
Enable the function
oFF
Disable the function
3.13 OFFSET MODE
For fine adjustment of the pan head position and the proportion of red, green, and blue, correction values
can be adjusted. For synchronous control of several units via the same DMX addresses it is e. g. possible to
minimize deviations of the light beam color and light beam direction.
1. Press the MENU button. The display shows
Addr
(Address). Never wait for more than 8 seconds to press
the next button, otherwise the adjusting procedure will be stopped.
2. Keep the ENTER button pressed for approx. 5 seconds until the display changes to
FAdJ
. he pan head
goes to the vertical position (0°) and the light beam is extinguished.
3. Press the ENTER button again. The light beam is switched on again and flashes in the display
FAdJ
.
4. If a horizontal beam direction is more suitable for a further adjustment, press the ENTER button (several times).
5. Press the MENU button and select the required function with the UP and DOWN buttons:
brEd
oPAn
Offset PAN:
fine readjustment for panning the head
000
. . .
oPAn
otIL
Offset TILT:
fine readjustment for tilting the head
000
. . .
2048
fine read ajustment for the proportion of red
bGrE
fine read ajustment for the proportion of green
bbLu fine read ajustment for the proportion of blue