PRO LIFTS VMB TE-086, Инструкция по эксплуатации и руководство пользователя

Страница: 9 / 32

Depósito legal y copyright 2014. Todos los derechos reservados.
9 PRO LIFTS S.L.
Quick operation guide
ENGLISH
4. USER INSTRUCTIONS.
4.1 -
Place the lift on its working position,
in a firm, flat surface with the help of the
swivel wheels (T).
4.2 - Remove the legs from their trans-
port supports (S) and fully insert them into
their working positions (
V
) checking that
they are fixed by the catches (
R
). Check
that the lift is in vertical position using the
spirit level (L
) at the base profile, adjust
the stabilizer (Q), turning the handle (H)
if necesary.
4.3 - THE MAXIMUM LOAD IS 300 Kg
(661 lb). The lift should NEVER be over-
loaded (over 300 Kg). Safety at work is
the most important issue. Untighten the
steel bracket (
B) and place the load onto
the lift using an adequate support accor-
ding to the need, use so that the weight of
the load will only be elevated in a vertical
direction. The minimum load is 25 Kg.
4.4 - Elevation:
Turn the winch crank
clockwise (
N
1
) to lift the tower, the red
ALS lock enable the lift to rise and auto
-
matically block the profiles whilst rising,
ensuring that the load will never fall.
4.5 - Blocking: Once the system is eleva-
ted to its required height, gently turn the
handle in an anti-clockwise (
N
2
) direction
to introduce the ALS locks in its corres
-
ponding hole and block the profiles. The
ALS lock will take the pressure of the load
and release strain applied on the cable.
Security system ALS
The TE-086 incorporates the patented
security system ALS (Automatic Lock
Security). This VMB red trigger system
automatically blocks the tower in the posi
-
tion it is left in. Each section of lift has an
ALS that blocks the section in the unlikely
event of the cable breaking.
4.6 - Lowering: To bring the lift down you
need to first turn the winch handle slightly
clockwise (
N
1
) and at the same time pull
the red ALS-1
lock out. This releases the
blocking systems. Then turn the handle
anti-clockwise (
N
2
), whilst maintaining
the ALS-1
lock pulled out until the profile
has been completely lowered. All red ALS
locks should be pulled out one by one
whilst the handle is turned anti-clockwise
and the profiles are brought down, one by
one.
CAUTION
When two towers are used to elevate a
bridge, down truss or many towers to ele-
vate a structure of any type, it is almost
3.17 - Only original replacement parts should be used.
O R I G I N A L