3
Wheel
Baskets
Hex Head Bolts
and Nuts
ASSEMBLY
1. Attach Hydraulic Unit to receiver platform using (2)
M8 x 1.25 Socket Head Cap Screws.
2. Insert the Bottle Jack Ram Pin to connect the Bottle
Jack to the cross head (If holes do not line up, twist
the Bottle Jack Ram until they are aligned).
3. Install Lift Pedal into Bottle Jack Pedal Sleeve and
secure with the Phillips Head Screw.
4. Insert Release Knob through Release Knob Guide
and attach to Hydraulic Unit with screw and nut
provided.
5. Install Wheel Baskets using (3 each) M10 hardware
provided.
6. After assembly, ensure lift rolls freely, lifts, locks and
lowers easily, and that Bottle Jack operates smoothly
before putting into service. Familiarize yourself with
operation of Height Locking Lever and Lift Pedal.
OPERATION
1. Position mower tires securely on Wheel Baskets,
centering the load on lift.
2. To familiarize yourself with basic operation, turn the
Release Knob:
a.
Clockwise
until firm resistance is felt to further
turning. This is the ‘
CLOSED
’ release valve
position used to
raise
the ram plunger.
b.
Counter-clockwise
, but no more than 1 turn from
the closed position. This is the ‘
OPEN
’ release
valve position used to
lower
the ram plunger.
WARNING:
Exercise caution when adjusting
the Release Knob - raise and lower load slowly
and carefully.
3. Locate and pump the Lift Pedal until the Wheel Bas-
kets begin to rise, monitoring mower and lift closely.
!
4. Continue pumping until load has reached desired
height.
5. Engage height locking mechanism fully before work-
ing on or around the loaded lift.
6. Turn the Release Knob counterclockwise until lift
lowers enough for Height Locking Levers to fully
engage holes in Base Frame.
WARNING:
Clear all tools and personnel be-
fore lowering load.
7. To lower lift, raise Lift Platform slightly to disengage
Height Locking Levers (use locking lever clip to hold
in the raised position), then use the release knob to
carefully turn release valve counterclockwise, lower-
ing the load slowly.
!
Bottle Jack
Ram Pin
Socket
Head Cap
Screws
Release Knob
attachment
hardware
