Blue Point Special EVO III note:
The Blue Point Special EVO III is supplied without a stylus guard so extra care
must be observed when handling. Because of the likelihood of damaging an exposed generator cartridge during the
process of removing and reinstalling the stylus guard, the stylus guard has been omitted from this model. When
mounting a Blue Point Special EVO III, take care not to touch the semi-exposed wires leading from the four gold
plated bars to the coil structure. These wires are very fragile and can be easily broken. Since it is not necessary to
touch the cartridge where the wires are exposed, the mounting process will not be affected in any way. We suggest
that you hold the Blue Point Special EVO III by either the blue top plate or the black rear plate of the cartridge during
the mounting process.
Using the supplied hardware, loosely mount the cartridge on the headshell. With a pair of small needle-nose pliers,
connect the tonearm (headshell) lead wires to the cartridge terminal posts using the following orientation: Red wire
to Right
+
, Green wire to Right
–
, White wire to Left
+
and Blue wire to Left
–
.
Do not solder
the leads to the
cartridge terminals as excessive heat may permanently damage the cartridge.
