N
0
515
TURNTABLE
OWNER’S MANUAL
515 MC
Страница 1: ...N0 515 TURNTABLE OWNER S MANUAL N0 515 MC ...
Страница 2: ...If there is a black cap on the bearing spindle remove it Carefully lower the platter on to the N0 515 spindle The platter is lubed with PTFE grease and needs no maintenance for at least two years Connect the power cord to the motor put the three belts around the motor pulley and platter spin the platter by hand and the belts will self level Verify the turntable is level by using a 9 or 12 inch bub...
Страница 3: ...SETTING THE AZIMUTH Although the azimuth is calibrated at the factory we suggest a quick check after cartridge alignment Place the long aluminum rod in the groove behind the mounting screws on the tonearm headshell Make sure the rod is parallel to the platter surface If it is not level carefully loosen the two set screws on the side of the tonearm rotate the tonearm wand to align the aluminum rod ...
Страница 4: ...Northridge CA 91329 USA 818 893 8411 USA only 2017 HARMAN International Industries Incorporated All rights reserved Mark Levinson is a trademark of HARMAN International Industries Incorporated registered in the United States and or other countries www marklevinson com ...
