Pro-Ject Audio Systems Pro-Ject MaiA DS, Инструкция по эксплуатации

Страница: 4 / 8

© Pro-Ject Audio Systems · Pro-Ject MaiA DS · Revision 2016.2.1
4
Mains power connection
Connect the low voltage plug from the power supply to the 24V DC Power socket before connecting the
power supply to the mains.
Remote control
turns the unit on or back into standby
and adjust the sound volume
- and select the inputs
Blank button confirms Bluetooth pairing
Activate/deactivate mute
Front panel controls
To switch on from standby or to standby
The push button on the left side of the front panel turns the unit on or back into standby. The blue LED above
the stand-by push button shows that the unit is switched on. Mute is active when LED is blinking.
Input selector
After the unit is powered on, pressing the buttons
◄
and
►
next to the LEDs inputs indicators select desired
input.
Volume
Adjust the volume to the desired level, using the large knob on the front panel.
Connecting a headphone
Connect the headphones to the ¼“ (6,3mm  ) jack socket on the front of the unit.
1
ON/OFF
0
VOL
0
+ VOL
1 9
0
CH
0
+
CH