Pro-Ject Audio Systems Pro-Ject MaiA DS, Инструкция по эксплуатации

Страница: 2 / 8

© Pro-Ject Audio Systems · Pro-Ject MaiA DS · Revision 2016.2.1
2
Dear music lover,
Thank you for purchasing an integrated amplifier from Pro-Ject Audio Systems.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect/disconnect the unit from the mains. Make sure that the power
supply is easily accessible at all times. Never handle the device, the power supply while your hands are
wet or damp. Avoid letting liquids enter the device or the power supply. Never place any item
containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or
the power supply. Never place any naked flame sources, such as lighted candles on or near the device.
The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any
other similar conditions.
Connectors
1. Make all connections except the connection to the headphone and USB whilst the unit is
disconnected from the mains.
2. Never connect or disconnect the power supply to or from the unit whilst the power supply is
connected to the mains. Never use any other power supply than the supplied one, with the exception of
dedicated Power Boxes which can replace original power supplies.
3. Take care to connect the left and right channels of RCA inputs correctly. The right channel is usually
marked red, the left channel black or white.
4. Speaker connections for the left speaker are located on the right hand side of rear view above,
connections to right speaker are located on the left side. Speaker connectors marked red rep
according indicators on speaker terminal.
Trigger connections
Use Trigger Input to connect MaiA DS to Power Box MaiA DS. MaiA DS will turn on/off once Power Box
MaiA DS is turned on/off.
Trigger Output allows to turn on/off any other Pro-Ject product which is equipped with trigger input.
Line output
A power amplifier or active loudspeakers can be connected to the output sockets marked Var Output.
!
!
!