© Pro-Ject Audio Systems · Pro-Ject Pre Box DS2 Analogue · Revision 2018.09.13
4
Front panel controls
Input selector
After the unit is powered on, pressing the buttons
◄
and
►
next to the LEDs inputs indicators select desired
input.
Volume
Adjust the volume to the desired level, using the large knob on the front panel.
Gain switch
The 6dB increase gain by 6dB when pressed.
Replacing batteries
Proceed as follows:
•
Unlock and slide open the battery case cover
•
Replace the battery.
Make sure the battery is the right way round !
•
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
Universal-Remote Control-it DS/RS
Control-it DS/RS is optionally available and allows you to comfortably control this and many other Pro-Ject
Box Design products on one remote.
