© Pro-Ject Audio Systems · Pro-Ject Pre Box DS2 Analogue · Revision 2018.09.13
2
Dear music lover,
thank you for purchasing this Pro-Ject Audio preamplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect or disconnect the unit from the mains. Make sure that the power
supply is easily accessible at all times.
Never handle the device, the power supply while your hands are
wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the preamplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Never use any other power supply than the one supplied with the unit.
Fix Output
Fix Output connects an analogue record device or a headphone amplifier like a Pro-Ject Head Box.
Var Output
A power amplifier or active loudspeakers can be connected to the output sockets marked Var Output.
Subwoofer output
An active subwoofer may be connected to the output sockets marked Sub Out.
Inputs
The unit has 5 line level RCA inputs marked In1- In 5.
!
!
!
