PRO Intellect Technology PRO 95, Руководство пользователя

Страница: 6 / 12

6
1,200 banknotes per minute. When the indicator is off, the device will process 900 banknotes
per minute.
6. “UV” button
Switch ON/OFF UV detection (indicator lights up if ON)
7. Indicator of functions in use.
When the indicator is lit up, that function is activated
8. Digit buttons
Used for entering number values on display 1 in batch mode (counting of a specified number
of banknotes).
Press any button (0-9) to enter batch mode automatically.
9. “CLR” button
Reset display 1. Press this button to exit batch mode.
10. “SET” button
Press the “ SET ” button to check the counter’s settings. This button also allows the operator
to change the device’s settings. (see Table7).
11. “START/STOP” button
Press this button to do the following:
• start counting
• stop counting
• zeros counting results on the main display 2
• resets the error messages on the display 1
• stores changes in settings
5 Safety precautions
• It is important to read the entire contents of this manual prior to operating the device, in order
to ensure proper functionality and safety.
• The manual should be available to operator
• The device should be installed on an even horizontal surface, away from water and danger-
ous objects.
• Do not use this device under the following conditions:
-The device is not resting on a level surface
-The device will be exposed to vibration while in use
-The device is in an excessively dusty or polluted room
-The device is exposed to direct sunlight or strong directional interior lighting
-The device is near other dangerous objects
• Do not operate the device with wet hands
• Do not expose to water (or other liquid). Avoid foreign objects
• Avoid dropping the device
• During operation: When finished be sure there are no banknotes in the hopper or transport
system
• Clean the device regularly and service the device as needed at a licensed service center to
ensure the device will function within its specified parameters
• Do not disassemble, repair or attempt to update the counter on your own. This can result in
damage to the device or injury to the operator
• If the device was exposed to cold for an extensive period of time, it is necessary to keep it
at the room temperature for no less than 4 hours, when the device has not been stored in a
box. If the device has been stored in a box while expose to cold temperature, allow the device