Pro-Form PFEX11916.3, Руководство пользователя

Страница: 10 / 24

10
9
11
77
6
D
10. The Console (6) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may damage
the displays or other electronic components.
Remove the screws and the battery cover (D),
and insert batteries into the battery compart-
ment. Make sure to orient the batteries as
shown by the diagram inside the battery
compartment. Then, reattach the battery cover.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the Console (6),
use only a manufacturer-supplied regulated
power adapter. Plug one end of the power
adapter into the receptacle on the back of
the Console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
10
9
9. Attach the Backrest (11) to the Seat Bracket (9)
with two M6 x 40mm Screws (77).
11. Have a second person hold the Console (6) near
the Handlebar (5). Plug the Main Wire (87) into
the receptacle on the back of the Console.
Tip: Avoid pinching the Main Wire (87). Make
sure that the Main Wire is routed through
the notch (E) in the Console Bracket (40).
Attach the Console (6) to the Upright (2) with
six M4 x 12mm Machine Screws (89) and the
Console Bracket; start all the Machine Screws,
and then tighten them.
Then, pivot the Console (6) to the desired angle.
Avoid pinching the
Main Wire (87)
89
40
6
5
2
87
E
11