8
5. The Console (4) can use four 1.5V “D” batteries
(not included); alkaline batteries are recom-
mended.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the screws and the bat-
tery cover, insert the batteries into the battery
compartment, and reattach the battery cover.
Make sure to orient the batteries as shown
by the diagram inside the battery compart-
ment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter.
Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
5
6.
Tip: Avoid pinching the wires during this
step.
While a second person holds the Console (4)
near the Upright (2), connect the console wire
to the Wire Harness (49).
Attach the Console (4) to the Upright (2) with
four M4 x 16mm Screws (84).
6
4
4
2
84
32
84
49
Console Wire
Batteries
Battery
Cover
Screws
Avoid pinching
the wires
All manuals and user guides at all-guides.com
