7
4.
Tip: Avoid pinching the Wire Harness (49)
during this step.
Orient the Water Bottle Holder (5) as shown
and slide it onto the Upright (2). Attach the
Water Bottle Holder with two M4 x 32mm
Screws (95).
Slide the Console Cover (32) onto the Upright
(2) and move it downward to the Water Bottle
Holder (5). Then, insert the Console Bracket (3)
into the top of the Upright. Attach the Console
Bracket with four M4 x 12mm Screws (35).
4
3.
Tip: Avoid pinching the Wire Harness (49)
during this step.
Have another person hold the Upright (2) near
the Frame (1). Locate the wire tie in the Upright.
Tie the lower end of the wire tie to the Wire
Harness (49). Next, pull the upper end of the
wire tie upward out of the top of the Upright.
Then, untie and discard the wire tie.
Tip: To
prevent the Wire Harness from falling inside
the Upright, secure the Wire Harness with a
rubber band.
Slide the Upright (2) onto the Frame (1). Attach
the Upright with four M10 x 20mm Patch
Screws (79) and four M10 Split Washers (78).
Tip: Tighten the two Patch Screws on the
front of the elliptical exerciser before tight-
ening the other two Patch Screws.
3
Avoid pinching the
Wire Harness (49)
Avoid pinching
the Wire
Harness (49)
2
1
49
78
78
78
79
79
79
35
35
95
49
32
3
5
Wire Tie
2
All manuals and user guides at all-guides.com
