9
4. Orient the Crossbar (14) so that the small holes
(A) are in the position shown.
Attach the Crossbar (14) to the Left Base (33)
with two M10 x 70mm Screws (23) and two M10
Washers (22); do not tighten the Screws yet.
Attach the Crossbar (14) to the Right Base
(10) in the same way.
See the inset drawing. Attach the Crossbar
Cover (16) to the Crossbar (14) with two
M8 x 65mm Bolts (28) and two M8 Locknuts (29).
5
4
5. Remove the four indicated M10 Locknuts (24)
and M10 x 95mm Bolts (26) from the left and
right Uprights (8) and from the Left and Right
Supports (11, 17).
Next, hold the Pull-up Bar (6) between the
Uprights (8).
Attach the Pull-up Bar (6) to the left Upright
(8) and to the Left Support (11) with two
M10 x 95mm Bolts (26) and two M10 Locknuts
(24); do not tighten the Locknuts yet.
Attach the Pull-up Bar (6) to the right Upright
(8) and to the Right Support (17) in the
same way.
10
14
A
22
23
23
16
28
14
26
24
8
24
6
24
33
8
24
26
29
29
11
17
Содержание PFBE25020.0
Страница 4: ...4 STANDARD SERVICE PLANS ...