Pro-Form PFBE25020.0, Руководство пользователя

Страница: 10 / 16

10
7. Attach two Support Plates (9) to the Left
Base (33) and to the left Upright (8) with four
M10 x 70mm Bolts (23) and four M10 Locknuts
(24); do not tighten the Locknuts yet.
Attach two Support Plates (9) to the Right
Base (10) and to the right Upright (8) in the
same way.
See steps 2–7. Fully tighten the M10 Locknuts
(24) and the M10 x 70mm Screws (23).
6. Finish attaching the Pull-up Bar (6) to the left
Upright (8) with two M10 x 70mm Bolts (23), two
M10 Washers (22), and two M10 Locknuts (24);
do not tighten the Locknuts yet.
Finish attaching the Pull-up Bar (6) to the
right Upright (8) in the same way.
6
8
8. Slide a Nylon Washer (3) onto the Landmine
Axle (2), and insert the Landmine Axle through
one of the holes in the Left Base (33).
Then, slide another Nylon Washer (3) and
a Large Washer (4) onto the Landmine Axle
(2), and insert a Cotter Pin (5) through the
Landmine Axle.
Next, insert a Band Anchor (12) through one
of the holes in the Left Base (33). Then, slide
a Large Washer (4) onto the Band Anchor, and
insert a Cotter Pin (5) through the Band Anchor.
Attach the other Band Anchor (12) to the
Right Base (10) in the same way.
9 9
9
23
23
33
24
10
22
22
24
8
8
6
23
24
3
3
5
5
2
4
4
33
12
10
12
8
8
7