18
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
An “E” (for miles) or an “M”
(for kilometers) will appear in
the lower right display. Press
the Speed increase button to
change the unit of measure-
ment, if desired.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
is turned on, a “d” will appear in the lower right display
while the information mode is selected. To turn on or
turn off the demo mode, press the Speed decrease but-
ton.
The upper display will show
the total number of hours that
the treadmill has been used.
The lower left display will show the total number of kilo-
meters (or miles) that the walking belt has moved.
To exit the information mode, remove the key from the
console.
