Pro-Form Dual Trainer PFRW5913.0, Руководство пользователя

Страница: 20 / 28

20
THE USER MODE
The console features a user mode that allows you to
select a unit of measurement for the dual trainer.
To select the user
mode, press and hold
down the Recumbent
Performance button for
a few seconds until the
user mode information
appears in the display.
The console can show the distance and the
Recumbent mode pedaling speed in either miles or
kilometers.
The display will show the selected unit of measure-
ment. An E for English miles or an M for metric
kilometers will appear in the display. To change
the unit of measurement, press the Display button
repeatedly.
Note: When you replace the batteries, it may be
necessary to reselect the unit of measurement.
To exit the user mode, press the On/Reset button.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to
computer or peripheral devices. Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate this equipment.