7
3
Wire
Tie
2
42
37
4.
Tip: Avoid pinching the Main Wire (42).
Slide
the Upright (2) onto the Frame (not shown).
Have a second person hold the Top Shield
Cover (37) out of the way. Attach the Upright (2)
with four M10 x 20mm Patch Screws (79) and
four M10 Split Washers (78).
Then, slide the Top Shield Cover (37) down-
ward and press it onto the Left and Right
Shields (44, 45).
4
1
78
78
45
44
79
79
79
1
2
42
Wire Tie
Avoid pinching the
Main Wire (42)
3. Orient the Upright (2) and the Top Shield Cover
(37) as shown. Slide the Top Shield Cover
upward onto the Upright.
Have a second person hold the Upright (2) near
the Frame (1).
See the inset drawing.
Locate the wire tie in
the Upright (2). Tie the lower end of the wire tie
to the Main Wire (42). Then, pull the upper end
of the wire tie out of the top of the Upright.
Tip: To prevent the Main Wire (42) from
falling into the Upright (2), secure the Main
Wire with a rubber band or a piece of tape.
2
42
37
