Pro-face PS-3600G Series, Руководство по установке

Страница: 23 / 23

22
„
Removal
(1) Lift up the tab of the USB holder and then remove the USB cover as shown below.
(2) After removing the USB cable, remove the picks pushing the USB holder from both top
and bottom.
The PS-G’s backlight can be replaced after it wears out. For the procedure for replacing the
backlight, refer to “PS-3600G Series User Manual”. The backlight’s model number is CA3-
BLU12-01.
The PS-G unit has an internal battery for backup of internal clock data.
For the procedure for replacing the battery, refer to “PS-3600G Series User Manual”. The
Lithium Battery CR2032 is made by Hitachi Maxell, Ltd.
• There is a danger of explosion if the PS-G unit’s backup battery is incorrectly replaced. This
battery should be replaced only with same or equivalent type recommended by Pro-face.
• Dispose of used batteries according to the battery manufacturer’s instructions.
Replacing the Backlight
Replacing the Backup Battery
USB Holder
Tab
USB Cover
Please be aware that Digital Electronics Corporation shall not be held
liable by the user for any damages, losses, or third party claims arising
from the uses of this product.
Note
© Copyright 2005 Digital Electronics Corporation. All rights reserved.