background image

3

„

LCD Panel Usage Precautions

The LCD panel’s liquid contains an irritant. If the panel is damaged and any of this liquid 
contacts your skin, immediately rinse the area with running water for at least 15 minutes. If the 
liquid gets in your eyes, immediately rinse your eyes with running water for at least 15 minutes 
and consult a doctor.

The PS-G unit’s LCD screen may show unevenness in the brightness of certain images or at some 
contrast settings. This is an LCD characteristic and not a product defect.

The PS-G unit’s LCD screen pixels may contain minute black and white-colored spots. This is an 
LCD characteristic and not a product defect.

The color displayed on the PS-G unit’s LCD screen may appear different when seen from outside 
the specified viewing angle. This is an LCD characteristic and not a product defect.

When the same image is displayed on the PS-G unit’s screen for a long period, an afterimage may 
appear when the image is changed. If this happens, turn off the PS-G, wait 10 seconds and then 
restart the unit. This is an LCD characteristic and not a product defect.

To prevent an afterimage:
* Set the PS-G unit’s display OFF feature when you plan to display the same screen image for a 

long period of time.

* Change the screen image periodically and try to not display the same image for a long period of 

time.

The term “PS-3600G” Series refers to the following PS-G model numbers:

PS3600G-T41 is a UL/c-UL recognized component (UL File No. 171486).

This product conforms to the following standards:

(A) UL60950-1

Information Technology Equipment-Safety-Part1

(B) CAN/CSA-C22.2 No.60950-1 (c-UL recognition)

Information Technology Equipment-Safety-Part1

PS-3600G Series Model Names

Series

Model

Description

Power Input Type

PS-3600G

PS3600G-T41

Windows

CE 5.0 (Japanese/ 

English version) is preinstalled 

as the operating system. 

Input voltage AC100/240V.

AC type

PS3600G-T41-24V

Windows

CE 5.0 (Japanese/ 

English version) is preinstalled 

as the operating system. 

Input voltage DC24V.

DC type

UL/c-UL Approval

Product Model No. UL Registration Model No.

PS3600G-T41

3384001-11

Содержание PS-3600G Series
























Отзывы: