Pro-face AST-3201A, Руководство по оборудованию

Страница: 35 / 59

ST3000 Series Hardware Manual
3-10
‹
Serial Interface (COM2)
This interface is used to connect an RS485 (MPI only) serial cable. A D-sub 9-pin socket connector is used.
<ST unit side>
<Cable side>
ST Connector XM3B-0942-502LX <OMRON Co.>
Interfit Bracket #4-40 inch screws are used.
Recommended Cable Connector XM2A-0901 <OMRON Co.>
Recommended Cable Cover XM2S-0913 <OMRON Co.>
Recommended Jack Screw XM2Z-0073 <OMRON Co.>
Pin
Arrangement
Pin No.
RS485 (MPI only)
Signal Name Direction Meaning
1 NC - -
2 NC - -
3 LINE(+)
Input/
Output
LINE(+)
4 RS(RTS) Output Request to Send
5 SG - Signal Ground
*1
*1. The SG and FG terminals are isolated.
6 5V - 5V external output
*2 *3
*2. The 5V output for Pin # 6 is not protected against overcurrent. To prevent damage or
unit malfunctions, use only the rated current.
*3. When providing power via the Siemens Co.’s PROFIBUS connector, power cannot
be connected to the Device/PLC.
7 NC - -
8 LINE(-)
Input/
Output
LINE(-)
9 NC - -
Shell FG -
Frame Ground
*1
(Common with SG)
9
6
5
1
(ST unit side)