6 LED MOTION SENSOR LIGHT
PELL0012
Please read these instructions carefully before use and retain for future reference.
•
Avoid locations of high temperature or humidity.
•
If the light output becomes less bright or flashes, replace the batteries.
•
Always remove the batteries if the light is not to be used for long periods.
•
Never mix new and old batteries or mix different battery types.
•
Slide the shield down the body and unscrew the lens unit from the main body and
insert the batteries into the holder noting the correct polarity.
•
The light will illuminate initially for 30 seconds before resuming it’s motion detection in
low light normal function.
•
Replace the lens unit and turn clockwise to lock into place.
•
Refit the shield.
IMPORTANT SAFETY INFORMATION
INSTALLATION
