WHAT’S INCLUDED
•
Heated towel rail.
•
Bag of fastenings including 4 screws, 4 wallplugs and 4 brackets.
WALL MOUNTING
•
Drill four holes at the corners of a 560 x 325mm rectangle.
•
Place the wallplugs in the holes.
•
Insert the screws into the brackets, then screw into the wallplugs, making sure you
leave 4mm between the screw head and the start of the bracket.
•
Attach the towel rail by inserting the upper and then the lower screws into the
notches at the back of the appliance.
IMPORTANT:
•
The wallplugs supplied with this product are designed to attach the bracket to solid
walls and require a hole to be drilled. For hollow walls or other wall types, use a
suitable alternative fixing.
•
Do not mount the appliance over a source of heat or moisture.
OPERATION
•
Plug in the power cable.
•
Press the switch. The indicator light will turn on, indicating that the appliance is on.
•
Place your towels on the heating bars.
•
Press the switch again when you want to turn off the appliance. The indicator light
will turn off.
CLEANING & MAINTENANCE
•
Unplug the appliance and wait for it to cool completely before cleaning.
•
Clean with a soft damp cloth.
•
Do not use any chemicals, abrasives or solvents that could damage the appliance.
TECHNICAL SPECIFICATION
•
Power supply: 220-240V~50Hz
•
Power consumption rating: 65W
Made in China. PR2 9PP
Man Rev 1.1
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronics
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recover and recycling of materials used. Contact your local
authority for details of recycling schemes in your area.
•
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
•
Do not place too many towels on the rail at once.
•
The towel rail’s bars are heated. Handle with caution when switched on or just
after switching off.
