Pro-Cut KG-12-FS, Инструкции по эксплуатации, обслуживанию и техническому обслуживанию.

Страница: 6 / 8

KG-12-FS
6
REVIEW BY CONSUMER FREQUENCY OF
VERIFICATION
COMMENTS
HEADSTOCK RING (20) ONCE A YEAR
PART REVIEW THREAD SO PREVENT ACCIDENTS
BAD JOIN IN THE HEAD
MOTOR AND SWITCH
DAILY
NOT ON THE TEAM WITH THE HEAD FULL OF
PRODUCTS AND / OR BECAUSE THIS CAUSES
ATOR
HIGHER AMPERAGE PEAKS ENGINE
DAMAGE AND /OR SWITCH.
5.- PARTS TO CARE FOR WEARING OUT:
TIME PARTS TO REVIEW
AND CHANGE
1 MONTH NYLON WASHER (15)
6 MONTHS KNIFE (18)
PLATE (19)
2 YEARS TRANSMISSION OIL
4
–5 YEARS
WORM (16)
HEADSTOCK (13)
NOTE: THE TIME IS AN AVERAGE PERIOD, ITS DEPEND ON THE USAGE.
The kind of oil is SAE 80W90 or equivalent, the quantity is ¾ of liter.
VIII.- ELECTRICAL SPECIFICATIONS
MODEL VOLTAGE FRECUENCY CURRENT PHASES MOTOR POWER
KG-12-FS 115 V~ 60 HZ 10,4 A 1 Ø 559 W 3/4 (HP)