Pro Charging Systems 4850OB Скачать руководство пользователя страница 8

 

    

 

  

This indication occurs if the battery voltage has not risen above 1.75 volts per cell within the first 3 hours of charging.  This 

indicates that a possible battery problem exists and that the charge cycle has been terminated at this point.   

 

  

 

 

  

30, 60 & 90% RED LEDS BLINKING............................................OVERALL TIMER SHUTDOWN  

 

  

This indication occurs if the charger has not completed the charge cycle within the allowable factory set time period.  This 

indicates that a possible battery problem exists and that the charge cycle has been terminated at this point. 

 

  

 

 

  

30 & 90% RED L

EDS BLINKING …..…..............................INTERNAL OVERTEMP SHUTDOWN  

 

  

This indication occurs if the charger circuitry has detected operating temperatures inside the charger enclosure that are above 

factory  specified  levels.    This  could  indicate  that  a  possible  charger  problem  exists  and  that  the  charge  cycle  has  been 
terminated.   

 

  

 

 

  

30% RED & 100% GREEN LEDS BLINKING …..….......................... BULK STAGE SHUTDOWN  

 

  

This indication occurs if the battery voltage does not rise properly during the Bulk Stage. This indicates that a possible battery 

problem exists and that the charge cycle has been terminated at this point.  Please call technical support for further assistance 
(

615.471.5300

). 

 

  

 

 

  

Note: Disconnecting and reconnecting the AC power supply cord will reset the charger. 

 

  

 

 

  

LIMITED WARRANTY 

 

  

 

 

  

Pro Charging Systems, LLC (PCS) makes this Limited Warranty only to the original retail purchaser.   

 

  

 

 

  

PCS warrants this battery charger for three years (unless the charger is used outside of the USA or the charger has a part 

number with the RM designation) from the date of retail purchase against defective materials and/or workmanship.  *-RM 
suffix refers 

to “Restricted Markets” such as Rental applications and Heavy Industrial applications.  These chargers, along 

with any chargers used outside of the USA, will have a warranty period of 18 months from the date of retail purchase against 
defective materials a

nd/or workmanship.  CR refers to “Certified Reconditioned” and designates a 1 year warranty.     

 

  

 

 

  

If such defects should occur, this unit will either be repaired or replaced at the discretion of the manufacturer.  It is the 

responsibility of the original purchaser to return the charger along with proof of purchase, transportation, and/or any mailing or 
handling charges prepaid to the manufacturer or its authorized representative.  Chargers that are purchased more than two 
years beyond the date of production will automatically have a warranty start date that will be the two year anniversary of the 
production date. 

 

  

 

 

  

This limited warranty is void if the product is misused, improperly maintained, handled carelessly or incorrectly operated.  

 

  

Additionally, this warranty is void if the charger is disassembled, the charger’s charge cables are cut, the power cord is cut off, 

the charger is altered without authorization from PCS, the serial number is removed, or repair is attempted by anyone other 
than an authorized representative.   

 

  

 

 

  

PCS makes no other warranty other than this limited warranty and expressly excludes any implied warranty, including 

warranty for any incidental or consequential damages.  This is the only expressed limited three year warranty authorized by 
PCS and does not authorize anyone to assume or make any other obligation towards the product other than this three year 
Limited Warranty.  Some states do not allow limitation of incidental or consequential damages. 

 

  

 

 

  

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 

 

  

 

 

  

Please call Pro Charging Systems, LLC for full warranty information and/or service please call (

615.471.5300

).   

 

  

 

 

  

 

  

 

 

 

  

Содержание 4850OB









Отзывы: