PRITY KPW 24, Инструкция по установке и эксплуатации

Страница: 42 / 64

42
1 - 1" hot water outlet stub pipe;
2 - Power supply 230V50Hz. ;
3 - WiFi- switch;
4 - Combustion air inlet ∅ 40mm;
5 - 1
"
cold water inlet stub pipe
;
6 - Flue gas outlet to the chimney.
4.5. Connection to the electricity mains
The appliance must be connected to the
electricity mains according to the operating
standards 230V 50Hz by means of the power supply
cable to a three - core Schuco - type wall outlet with a
transitional device for protection against
overvoltages /power surges /.
Connection to the protection neutral earthing
must be 100% tested and verified in advance.
Usage of an additional combined device for
stabilization of voltage to a normal sinusoidal waveform and its redundancy using deep -
cycle battery is recommended.
Usage of devices with pulsed non - sinusoidal voltage is absolutely forbidden, because
it can cause damage.
For more information, ask your electrician or dealer.
4.6. Pellets used
The fuel is wooden pellets
∅
6mm/30mm, calorific capacity 4.8 - 4.9 kWh/kg, class
ЕN plus А1,
according to BDS EN ISO 17225- 2:2014
.
Pellets’ quality is of particular
importance. Regardless of the certificate available, some pellets show various
disadvantages upon combustion: producing more ash, slag in the ash, low efficiency and
calorific value.
Pellets with greater moisture content can cause temporary condensation in the suction
box.
USAGE OF OTHER FUELS AND WASTE IS NOT ALLOWED!