PRITY KPW 24, Инструкция по установке и эксплуатации

Страница: 39 / 64

39

During operation, the firebox door must always be closed. Do not allow
opening of the firebox door during operation and in presence of fire for more
than 10 seconds.

During operation some surfaces are heated to high temperatures, which if
touched accidentally or erroneously, severe heat - related injuries can occur.

Modifications of the appliance are not allowed.

When some part needs replacement, only original parts must be used.
3.1. Standards and legislation
This appliance is manufactured in conformity with a type specimen tested in a notified
laboratory in accordance with the following standards: EN14785:2006,EN 55014,EN
60335,EN 61000 and according to Regulation (EU) 2015/1185, about which a Declaration
of Performance has been issued.
All local, national and European standards must be observed during installation and
operation of the appliance.
3.2. Liability
The manufacturer shall bear no liability in cases of damage or accident caused by the
following circumstances in the process of operation:

Failure to comply with the instructions.

Failure to comply with the usual rules for safety.

Incorrect operation of the appliance.

Poor maintenance.

Installation not in conformity with standards in the country.

Installation by unqualified or untrained personnel.

Modifications and repairs, not regulated or approved by the manufacturer.

Usage of non - original spare parts.

Extraordinary events. Force - majeure.

Unauthorised intervention in the service menu.
4. INSTALLATION
The proper and fault - free operation of the pellet stove requires proper
connection to the WHS and the flue gas exhaust system. The initial
setting up and commissioning, in conformity with the pellets’ quality
and the chimney draught, should be performed by specialized technician
for the respective work or representative of the manufacturer.
General requirements for the installation of the appliance:

It must be installed in a room with permanent inflow of fresh air for the
combustion process provided.