background image

10

  

 

Prior Scientific 

11. 

Using a Camera 

The PriorLab / PriorLux microscopes, when fitted with a trinocular head, can be used with 

a range of cameras for documentation purposes. Video cameras, both analogue and digital 

provide ‘moving’ pictures for more advanced imaging applications, while digital ‘still’ 

cameras can be used for basic image capture.  

Detailed instructions for the operation of the selected video or digital camera are supplied 

with the camera. 

Assembly Video Cameras 

A.

 

Screw the c-mount adapter (part no. WXCM1 1.0x or WXCM050 0.5x) to the 

video camera 

B.

 

Loosen the knurled silver screw on the c-mount adapter and insert the adapter 

with the attached camera into the top of the photo tube on the trinocular head 

C.

 

Tighten the screw to secure the assembly 

D.

 

Connect camera to a PC, framegrabber or analogue monitor as required 

E.

 

To view the image via the camera, pull out the light path selector on the side of 

the trinocular head. This diverts 80% of the light to the camera and 20% to the 

eyepieces 

Assembly Digital Cameras 

This is similar to the assembly of video cameras above, but a digital coupler (part no. 

MZO1403 suitable for the Nikon Coolpix 4500 or the MZO5503 suitable for the Nikon 

Coolpix 5400) and a step down ring (part no. W3000) may also be required depending on 

the camera model used. 

For more detailed set up information refer to the literature supplied with the camera. 

 

 

 

 

 

 

Содержание PriorLab
















Отзывы: