Printronix P5005B, Руководство пользователя

Страница: 269 / 366

ETHERNET PARAMS
269
Pwr Save Control
Allows you to enable or disable the Power Save (Energy Star)
mode.
•
Enable (default). Allows you to enable the Power Save (Energy
Star) mode.
•
Disable . Allows you to disable the Power Save (Energy Star)
mode.
Tear Bar Dist. (Distance)
Allows fine and course adjustment of the tear bar position. For a
pedestal model printer with a quick access cover using the front
paper exit, the default (5.12 inches) is used. You can specify 4.5 to
10.5 inches in .01 inch increments to accommodate variations in
cover and form design. If the printer is not equipped with a quick
access cover, or when rear paper exit is desired, the tear distance
should be set to accommodate the rear position. This requires
setting the Tear Bar Distance to 9.92 inches.
Shuttle Timeout
The amount of time the shuttle continues moving after no data is
received. If your host is slow, setting the number to a higher value
will prevent the printer from spending time shuttling up and down
between data bursts.
Bar Code Quality
Determines the bar code resolution for all emulations, except IPDS.
(See “IPDS Emulation” on page 221 to set the bar code quality for
IPDS.)
•
Draft (default). Bar code resolution is set at 60 x 72.
•
Dark . Bar code resolution is set at 120 x 72.
•
Recommended . Bar code resolution is set at 120 x 144 in
unidirectional mode.
PRINTER CONTROL