PrintDry FD2003-120, Инструкция по эксплуатации, Страница: 14 / 16

- 14 -
CARE AND MAINTENANCE
 Turn off the dryer.
 Unplug from the wall outlet.
 If needed, wash the base with a soft, slightly damp cloth or sponge.
 DO NOT allow water or any other liquid to get into the dryer base.
 Make sure the trays and lid are completely dry before replacing them on the
base and storing.
 Any other servicing should be performed by an authorized service
representative.
Models
FD2003-120, FD2003-220
Power Supply
110-120VAC, 60Hz, 300W (Model 2003-120)
220-240VAC, 50Hz, 300W (Model 2003-220)
Dryer Temperature
*
35-75°C with 10°C increment ( 95-167°F)
Weight
4.5 Kg (8.5 lbs)
Dryer Dimensions
32(W) x 26(L) x 35(H) cm (13x11x16")
Max. Drying Time
48 Hours (Continuously)
Spool Dimensions
Outside Diameter 100-300mm (4-12")
Height 25-150mm (1-6")
Mount Hole Diameter 19-58mm (3/4 - 2.3")
Max. Weight 5Kg (8.8 lbs)
* The temperature inside a dryer varies due to the following factors: (1) ambient temperature; (2)
location inside a dryer; (3) how many filament spools and desiccant pouches are in the dryer.
Higher ambient temperature means higher temperature inside a dryer. The temperature is
higher when close to the hot air outlet. The temperature inside a dryer is higher when drying
multiple filament spools and a lot of desiccant pouches.
4. SPECIFICATIONS