6. Tables of Changing Mode:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Description
No.
Mode
Description
No.
Mode
3 Colors Skipping
7 Colors Skipping
White Strobe
7 Colors Strobe
Rgb Fade out and Fade in
Red Green Color Smooth
Red Blue Color Smooth
Green Blue Color Smooth
Red Yellow Color Smooth
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Green Cyan Color Smooth
Blue Purple Color Smooth
Green Yellow Color Smooth
Blue Cyan Color Smooth
Red Purple Color Smooth
Blue White Color Smooth
Yellow Purple Cyan Color Smooth
RGB Color Smooth
Full-color Smooth
4. Operation Panel and Component Instruction:
On
Off
Pause
Key
Mode
Key
Zone
Selection
y
e
K s
Scene-save Keys
Touch
Full-color
Circle
Speed
Key
Brightness
Key
Sync
Status
Indicator
Light
M1 M2
3
2
10
6
5
4
9
8
7
(Keep pressing to adjust brightness continuously)
Select one of the zone: Press keys 1-10 on the remote control.
All choose(10 zones): Press" " twice.
Select zone control arbitrarily :Press" +any ",
eg: take 456 as a zone, should press" 456 "
Zoning Instructions:
Press “Pause” button in 3 seconds, the buzzer can be on or off.
(Press for 3 seconds, can save the
scene mode in the 10 current
zone control)
5. Other Special Functions
:
Turn on the remote, long press the on/off key for 5 seconds until the red light flashes 3 times, and then the
green light flashes, the numbers of the green flash will be the frequency point of the remote. you can only edit the
frequency point after 3 seconds.
Method 2: long press “on/off” key over 5 seconds, the green light flashes, the flash times plus 1 means the
frequency point accumulate 1. In short, long press the “on/off” key 5 seconds each time, the frequency
point will accumulate 1, which will again become value 1 when added to 12, and that cycle repeats.
A. Reset Function
:
B. Check and Edit the Frequency Point on the Remote:
Long
press
simultaneously
release
the 2
keys
after
3
seconds
the
remote
will
auto
off
means
reset
completed
and then
could
restart the remote.
Feature:
Reset function is available when remote operates abnormally.
Operation:
a.
Multiple remotes sync-control becomes available when they use the same frequency point.
Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user.
b.
After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID.
Attn:
Feature:
Check the Frequency Point on the Remote:
Edit the Frequency Point on the Remote:
In frequency changing state
Method 1: short press any key from 1-9, the frequency point will be 1-9 correspondingly, the green light will flash in
the same numbers. Press again any key or touch the color circle to exit the frequency edit state.
On/Off Key
Pause Key
Mode Keys
Speed
Keys
Brightness Keys
Power Input Socket
DC12
d
24V
LED Lamp connected socket
T3-5A
PAUSE
MODE
MODE
BRT
BRT
SPEED
SPEED
T3M 2.4
G LED RGB Controller Manual
T3M 2.4
G LED RGB Controller Manual
Содержание T3M RGB
Страница 1: ...T3M RGB CONTROLLER...
