T3M
2.4G LED RGB Controller
T3M is the 2.4GHZ RF wireless synchronization/zone RGB controller which adopts LTECH multiple globalinitiate technology.
The control system consists of two parts, the RF remote control and receiver, realize the signal synchronization on multiple
receivers, zone controlled arbitrarily (no more than 10 zones) within effective distance, a very good solution for the LED project
needs sync control wirelessly. User-friendly touch full-color wheel for color selection, unique LED state light for sync change
indicated, user can simply know the LED working state from distance by checking the remote control.
Can RF remote the functions of switch, pause, changing modes, changing speed and the brightness and so on. Satisfied
with your requirement of sync control multiple zones, group control or control separately, which t is easy to use.
1. Technical Specs:
Input Voltage: DC5V Built-in Lithium Battery
Working Current: <30mA
Working Frequency: 2.4GHZ
RF Remote Distance: 30m
Remote Option: Sync or Zone Control
Change mode: 18 Fantastic modes
Battery Capacity: 1000mAh
Standby Time: 6 months
Normal Using Time: 30 days
Dimension: L145×W55×H22(mm)
Package Size: L168×W102×H28(mm)
Weight (G.W.): 200g
Input voltage: DC12V-DC24V
Max current load: 5A×3CH Max 15A
Max output power: 180W/360W(12V/24V)
Control button: 8 touch button
Compatible remote control: workable with T3, T3M, T3X
T3-5A CV Receiving controller
Working temperature: -30
℃
㹼
55
℃
Dimension: L211×W40×H30mm
Package size: L215×W42×H32mm
Weight (G.W.): 180g
T3M Remote Control
2.
Product Size:
T3M RF remote control
T3-5A
Remote holder
3. The learning ID method of remote control:
T3-5A learning ID:
T3-5A cancelling ID:
1. Turn on the receiver and remote control.
2. Press “on/off button” on the T3-5A for 2 seconds, there is a buzzer sound, and do not release your hand on the
button , at the same time press any keys of 1-10 zone on the remote control, until the green indicator light
of
remote control flashes 3 times(a voice prompt at the same time), release all the keys.
1. Turn on the receiver and remote control.
2. Press “on/off button” on the T3-5A for 2 seconds, there is a buzzer sound, and do not release your hand on the
button , after 5 seconds press any keys of 1-10 zone on the remote control, until the red indicator light
of remote
control flashes 3 times(a voice prompt at the same time), release all the keys.
T3M 2.4
G LED RGB Controller Manual
T3M 2.4
G LED RGB Controller Manual
Содержание T3M RGB
Страница 1: ...T3M RGB CONTROLLER...
