Princess Style Pro 509201, Руководство пользователя

Страница: 7 / 40

7
EN
Use a wide-toothed comb to avoid damage •
to the hair.
Move the hot airflow in the direction of the •
hair to avoid disturbing the cuticle.
Do not use a brush until the hair has dried •
sufficiently to avoid damage to the hair.
Do not rub your hair with a towel to prevent •
your hair from catching on the fibres,
stretching and snapping.
First treat the lower sections of your hair •
and slowly move the appliance to the
higher sections.
If you use the appliance with the head •
upside down, your hair will get more lift and
body.
If styling is required or if you have curly •
hair, make sure that your hair is a little
damp.
If you have curly hair, use the diffuser to •
spread the airflow and to make sure that
the curls are not straightened out.
If you have fine hair, you must use a lower •
temperature setting. If you have rough hair,
you can use a higher temperature setting.
If you have a cowlick, wrap your hair firmly •
around a brush in the opposite direction
and then blow-dry to smooth out the
cowlick.
Switching on and off (fig. C)
To switch on the appliance, set the on/off •
switch (1) to one of the following positions:
- For a lower blowing force, set the
on/off switch (1) to the ‘I’ position.
- For a higher blowing force, set the
on/off switch (1) to the ‘II’ position.
To switch off the appliance, set the •
on/off switch (1) to the ‘O’ position.
Setting the operating temperature
(fig. D)
For a low temperature, set the temperature •
switch (2) to the ‘O’ position.
For a medium temperature, set the •
temperature switch (2) to the ‘I’ position.
For a high temperature, set the •
temperature switch (2) to the ‘II’ position.
Using the cool air function (fig. E)
The cool air function makes sure that the
appliance temporarily provides a cooler airflow.
Description (fig. A)
Your 509201 Princess hairdryer has been
designed for blow-drying your hair.
1. On/off switch
2. Temperature switch
3. Cool air function button
4. Handgrip
5. Airflow outlet
6. Air intake filter
7. Nozzle
8. Diffuser
Assembly
Warning! Before assembly, always switch off
the appliance and remove the mains plug from
the wall socket.
Mounting the accessories (fig. B)
The nozzle (7) focuses the airflow onto a small
area and smoothes out the hair for a sleeker
style. The diffuser (8) makes your hair appear
thicker and provides soft waves for a more
tousled look.
Press the accessory onto the airflow outlet •
(5) until it clicks into place.
Use
Warning!
Do not use the appliance near bathtubs, •
showers, basins or other vessels
containing water.
If you use the appliance in a bathroom, •
remove the mains plug from the wall
socket after use. The presence of water
can cause a risk of personal injury or
damage to the appliance even when the
appliance is switched off.
For additional protection, install a residual •
current device (RCD) with a rated residual
operating current that does not exceed
30 mA in the electrical circuit of the
bathroom. Contact your installer for advice.
Hints for optimum use
If possible, allow your hair to partially dry •
naturally. If it is necessary to use the
appliance, remove as much moisture from
your hair as possible.