background image

R

980-

5

00revA-EN

Printed in USA 04/17 © 2017

Operating 

Instructions

Universal Slicer 

Saber King™

TM

355 East Kehoe Blvd. • Carol Stream, IL 60188 USA

Telephone: 630-462-8800 • Toll Free: 1-800-PCASTLE

Fax: 630-462-1460 • www.princecastle.com

Product Identification

LIMITED WARRANTY

This product is warranted to be free from defects in material  

and/or workmanship for a period of one (1) year from date 

of original installation, not to exceed 18 months from date of 

shipment from our factory 

with the exception of the blade/

pusher cartridge

. Blade/pusher cartridge is warranted to be free 

from defects at time of delivery only.
Any component which proves to be faulty in material and/or 

workmanship will be replaced or repaired (at the option of Prince 

Castle LLC) without cost (including freight and duty) to the 

customer for parts or labor.
This warranty is subject to the following exceptions/conditions:

 

Use of food products other than those specified will void this

warranty.

 

This equipment is portable; charges for on-location service

(e.g., trip charges, mileage) are not included in the provisions

of this warranty.

 

Damage caused by carelessness, neglect, and/or abuse (e.g.,

dropping, tampering or altering parts), equipment damaged in

shipment, by fire, flood or an act of nature is not covered under

this warranty.

TABLE OF CONTENTS

Product Identification ............................................................... 1
Safety Information ................................................................... 2
Important ................................................................................. 2
Description............................................................................... 2
Specifications .......................................................................... 2
Installation ............................................................................... 2
Choosing and Inserting a Cartridge......................................... 3
Operation ................................................................................. 4
Removing a Cartridge .............................................................. 5
Cleaning .................................................................................. 5
Exploded View and Parts List .................................................. 7

Chassis

Blade 

Component

Pusher Component 

of Blade/Pusher 

Cartridge

Handle Latch

Crossbar

Handle

Cartridge 

Locking Pin

Chassis & Blade Sets

980-000-00           Chassis   

   

980-000-10A        3/16" Tomato Slicer

980-000-12A        1/4" 

  

Tomato Slicer

9

80-000-20A        3/16" Onion

980-000-22A        1/4"   Onion

980-000-32A        1x1 Chop

980-000-33A        1x2 Chop

9

80-000-34A        1x7 Chop

980-000-50A        1/4" Dicer
980-000-51A        3/8" Dicer

9

80-000-52A        1/2" Dicer

980-000-60A        4 Sections Wedger 

Prince Castle ©

980-000-62A        8 Sections Wedger

980-000-43A        5/16" Shredder

980-000-61A        6 Sections Wedger

980-000-6

5

A        

Citrus Halfer

Содержание Saber King








Отзывы: