Printed in USA 04/17 © 2017
980-500 RevA-EN
6
TM
Universal Slicer
Saber King™
Cleaning (continued)
Remove the blade/pusher cartridge from the
chassis.
Refer to the instructions under
Removing a
Cartridge
in this manual.
2
Carry the blade/pusher
cartridge to the three-
compartment sink.
Put on the cut-resistant
gloves. Separate the
blade and pusher
components.
3
Clean the blade
and pusher
components in
the sink.
Using
the cleaning brush,
scrub off any
residue.
NOTE: Blades
should only be
disassembled by
AUTHORIZED
FACTORY
personnel.
4
Rinse and sanitize the blade and pusher
components.
5
Assemble the
sanitized blade
and pusher
components.
Let
the assembled
cartridge air dry.
6
Clean, rinse
and sanitize the
exterior surfaces
of the chassis.
Wipe the chassis
first with a cleaning
solution, then with
clear water and
finally with sanitizing
solution. Let the
surfaces air dry.
7