Universal Slicer
Saber King™ Mini
981-500 RevA-EN
5
Printed in USA 04/18 © 2018
Removing a Cartridge
1
Ensure the handle
on the chassis is
down.
If necessary,
place one hand on
the handle, and the
other hand on the
palm rest. Lift the
handle up, then use
your thumb to open
the handle latch and
then pull the handle
down.
2
Move the cartridge
locking pins to the
unlocked position.
Move the two upper
cartridge locking
pins and the two
lower cartridge
locking pins to their
horizontal positions
so the cartridge can
be removed.
3
Holding the pusher and blade components together
as one cartridge, remove from the chassis.
Guide
the sides of the pusher component out of the C-shaped
channel in the chassis.
Inspecting Blades and Pushers
CAUTION
Please inspect the blades before and after every use.
Immediately stop using and replace the blade cartridge if the
blades show sign of damage.
Cleaning
Daily cleaning will keep this universal slicer clean and free from
buildup.
CAUTION
Do not allow residual food juices to remain on the blade
component for long periods. A hard deposit may form on the
blades which is difficult to remove and will dull the blades.
1
Gather tools and supplies
you will need for cleaning.
•
Cut-resistant gloves
•
Three compartment sink
•
Cleaning brush,
P/N 980-021 Red/Green
•
Cleaning brush,
P/N 980-043 White/White
•
Sanitizing solution
•
Cleaning solution
2
Remove the blade/pusher cartridge from the
chassis.
Refer to the instructions under
Removing a
Cartridge
in this manual.
3
Carry the blade/pusher
cartridge to the
three-compartment sink.
Put on the cut-resistant
gloves. Separate the blade
and pusher components.
