EC-C60003 RevA_EN 5 / 8
Temperature Unit Switch & Calibration
Load Factory Presets
1. Press “SET” button one time and the display will
read "_ _ _ _." Enter the four-digit security code
sequence: 2, 3, 4, 1.
2. The window will display “dEGC” or “dEGF”, set the
desired temperature unit with the "1” or “2" buttons
3. Press the “SET” button to save the change.
4. Place an external thermometer on the middle of
the heater platen.
5. Press the Up or Down arrow until the display
matches the external meter.
6. Press the “SET” button to save the change.
To revert all settings back to the original factory defaults:
1.
Turn off the power switch, press and hold “3" buttons.
2.
Turn on the power switch and hold “3" buttons for 5 seconds.
3.
The window will display "PSE." That means to reset to factory defaults.
Factory presets
：
Cooking time
：
2:30 mins
；
Temperature
：
302
ο
F (150°C)
Load Factory Presets
EC12
Series
