Prince Castle CTD, Оригинальное руководство пользователя

Страница: 11 / 23

CTD & CTDE
Vertical Contact Toasters
11 301-500rev
E
-EN
Daily Planned Maintenance (continued)
5
Open the conveyor doors.
For each door, lift slightly
from the bottom to unlatch
and guide down to the
surface.
6
Clean the release sheet. Put on neoprene gloves.
Dampen a clean cloth with lukewarm soap and water.
Wipe down both sides of the release sheet, making sure
all built-up sugar is removed. Wipe down both sides with
a clean cloth, dampened with water, to rinse. Allow to
air dry.
NOTE: Rotate sheets daily for longer life. Depending on
volume of product toasted, sheets should be replaced
every 4 to 6 weeks.
7
Reinstall the release sheet.
8
Clean the conveyors, inside of the doors, and bun
infeed.
Wipe the conveyor with a clean cloth dampened
with Multipurpose Detergent Solution, rotating it as you
clean to reach its entire surface. Wipe the entire surface
with a clean cloth, dampened with sanitizer solution.
Dampen a clean cloth with lukewarm soap and water.
Wipe the inside of doors and bun infeed. Wipe the
inside of the doors and bun infeed again with a fresh,
clean, sanitized cloth.
CAUTION
Do not use abrasive cleaners or pads on the
conveyor surface.
9
Close the conveyor doors.
10
Reinstall the bun infeed.
11
Clean outside of the
toaster.
Dampen a clean
cloth with lukewarm soap
and water. Wipe down the
outside of the entire toaster.
Wipe down the entire toaster
again with a fresh, clean,
sanitized cloth.
Maintaining Silicon
e
Wraps
Printed in USA
5/1/2022
A. The Silicone wrap can be left on the unit for this
operation.
B. Open the door to gain access to the wrap.
C. Using a clean and damp rag , wipe the visible
surface of the wrap. After wiping, rotate the
conveyor forward and continue wiping, ensuring
the belt does a full 360 around the unit.
D. A clean and maintained belt should last
approximately 6 months , but varies by cu s tomer
and volume put through the toaster.