EQUIPMENT SET-UP, CALIBRATION,
CLEANING AND CLOSE PROCEDURES
Set-up
IMPORTANT:
Clean out any remaining water from filter
machine bowl.
1. Place the screen, with its thread facing up, inside the
filtering bowl. See figure 1.
2. Place filter paper (manufactured to McDonalds
specifications) over the threads and on top of the
screen. Be sure the hole in the paper is centered to
fit over the shoulder so the paper will lay flat. See
figure 2.
3. Screw on the standpipe. Tighten by hand. See figure
3.
4. Place the ring weight on the filter paper. Make sure
paper is not folded or creased under the ring. See
figure 4.
5. Center safety grid over standpipe. This will allow the
grid to suspend over the rim of the filtering bowl. See
figure 5.
6. Set the motor on the edge of bowl and screw the union
to the standpipe by hand. Make sure the connection
is hand tight. See figure 6.
7
figure 1
figure 2
figure 3
figure 4
figure 5
figure 6