DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001
The information in this document is subject to change without notice.
Page2
PrimeCare™ PCB901 Rotating Half Rail
Intended use:
The rotating half rails are intended to help patients with exit from and entry to
the PCB901 bed. These devices are NOT intended to be used for restraint purposes.
Intended application environment:
This device is intended to be used in a long term care
facility, application environment 3. The environmental conditions for use and storage are as
follows.
Use Environment: Ambient temperature: 10°C ~ 40°C (50°F~104°F)
Relative humidity range: 30% ~ 75%
Transport/storage Ambient temperature: -10°C ~ 50°C (14°F~122°F)
environment:
Relative humidity range: 10% ~ 93%
Maximum patient weight/safe working load:
This device is not intended to support the
entire weight of a patient. This device has been tested to allow a downward load of 750 N (168
lbf) and a side load of 500 N (112 lbf).
Description of device function:
This device has a single upright locked position. When the
upright locked position is not desired, the lock may be released by lifting the handle to unlock
and then rotate the device down to its lowered position.
Frequently used functions:
Lift the release handle to rotate the device.
The device locks only in the upright position.
Contraindications to use:
This device shall not be used with patients who do not have the
cognitive ability to understand the operation of the device or have the strength to release the
device from its locked position.
