DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001
The information in this document is subject to change without notice.
Page5
WARNING
Bed should be at lowest suitable height for entry and exit.
ENTRAPMENT WARNING
Accurate assessment of the patient and monitoring of correct maintenance and use of
equipment are required to prevent entrapment. For additional information on product
and safety issues for bed frames and rails review the manual specific to the products
you are using. If bed frames have been serviced or any other adjustments have been
made, make sure all parts are securely back in place before operating the bed frame.
ENTRAPMENT WARNING
The risks associated with these devices used in conjunction with specialty mattresses and
mattress overlays have not been evaluated. When these specialty mattresses or mattress
overlays are used the end use facility must take steps to ensure that the therapeutic benefit
outweighs the risk of entrapment.
ASSIST RAIL WARNING
Other manufacturers assist rails/bars may not be compatible and can lead to
entrapment issues or harm to patients. Only compatible Primus Medical assist bars and
rails may be used on this bed. Make sure mattress is the correct size for bed frame and
the assist bars are secured to frame to decrease the risk of entrapment.
Installation:
1.
Remove the half rails from the packaging.
2.
Remove the 2 knobs from the mounting bolts for one half rail.
3.
Install the left or right side half rail by lowering the half rail over the top of the bed deck
lining up the holes in the half rail mounting bracket with the holes in the square tube on
the deck.
NOTE: There are alignment pins that must be paid attention to. These pins help with the
identification of the appropriate mounting positions.
